多模式超级电容充电电路设计讲述.docVIP

论文题目： 多模式超级电容充电电路设计 专 业： 微电子学 本 科 生： （签名）___________ 指导教师： （签名）___________摘 要超级电容一种新型储能设备可快速充电、大容量、寿命长等优点。如何快速高效的超级电容进行充电，成为研究的热点本论文结合相关研究对充电进行了。 目前对超级电容进行充电的式主要有恒流充电、恒功率充电、以及恒压充电等。本论文研究结果，设计了具有恒流、恒功率以及恒压三种模式的充电路，硬件电路包括Buck变换电路、PWM驱动控制电路、模式控制电路，在对超级电容进行充电的同时，通过采样电路，将采样信号反馈给控制电路，实现三种充电模式这样可以有效的解决在单一充电模式下的不足之处，在一定程度上提高超级电容的充电效率。 输出电流、输出电压等参数进行了测试，所得到的 关键词：超级电容Buck变换器PWM，多模式充电 Subject: Multi-Mode Super capacitor charging circuit design Specialty: Microelectronics Science and Engineering Name: JueXuan (Signature) ___________ Instructor: ShiZhishou (Signature) ___________ ABSTRACT Super capacitor is a range of new energy storage device between conventional capacitors and batteries, it has a fast charge, high-capacity, wide operating temperature range, energy saving, long life advantages. So countries have increased the research efforts of the super capacitor, it is widely used in consumer electronics, solar power, backup power and other aspects, especially all around the world is concerned about the field of electric vehicles application widely. How to quickly and efficiently charge the super capacitor, has become a new focus of research, this article combines research results on the multi-mode charging circuit design scheme and design are analyzed. Currently the super capacitor is charged mainly constant current charging mode, constant power charge, the constant flow of constant voltage charging, pulse current charging and constant voltage charging. Currently the super capacitor is charged mainly constant current charging mode, constant power charge, the constant flow of constant voltage charging, pulse current charging and constant voltage charging. Hardware circuit includes a Buck conversion circuit, PWM wave drive control circuit, the charging mode control circuit, At the same time the super capacitor is charged, by sampling circuit, the sampling signal back to the control circuit, conv