互操作V3答案.doc

系统间互操作 空闲态小区重选 q-Hyst 4db MOD CELLRESEL: Qhyst=DB0_Q_HYST; 用于R准则比较 cellreselectionpriority 7 MOD CELLRESEL: CellReselPriority=7; RxLevMin -64*2=-128 MOD CELLRESEL: QRxLevMin=-64; S-NonIntraSearch 14*2=28 MOD CELLRESEL: SNonIntraSearchCfgInd=CFG, SNonIntraSearch=14; QrxLevmeas=28-128 -100时起测 threshServingLow 3*2=6 MOD CELLRESEL: ThrshServLow=0; QrxLevmeas 6-128=-122 低优先级的重选门限 p-Max=23 23-23=0 不用考虑功率补偿 S-IntraSearch 23*2=46 MOD CELLRESEL: SIntraSearchCfgInd=CFG, SIntraSearch=23; sib1的Qrxlevminoffset 缺省是0不用考虑 PLMN级别的偏置 Cellreselectionpriority 4 MOD UTRANNFREQ: CellReselPriorityCfgInd=CFG, CellReselPriority=4; threshX-low 11*2=22 MOD UTRANNFREQ: ThreshXLow=11; RxLevMin -58*2+1=-115 MOD UTRANNFREQ: QRxLevMin=-58; q-RxLevMin Parameter “Qrxlevmin” in TS 25.304 [40]. Actual value = IE value * 2+1 [dBm]. p-MaxUTRA=33 MOD UTRANNFREQ: PmaxUtran=33; Pcompensation=33-24=9 Qrxlevmeas22-115+9=-84 TD每个频点下发一套参数 2G频点组 cellreselectionPriority 1 MOD GERANNFREQGROUP: CellReselPriorityCfgInd=CFG, CellReselPriority=1; RxLevMin 0*2-115=-115 MOD GERANNFREQGROUP: QRxLevMin=0; q-RxLevMin Parameter “Qrxlevmin” in TS 36.304 [1], minimum required RX level in the GSM cell. The actual value of Qrxlevmin in dBm = (IE value * 2) ( 115. ThreshX-Low 10*2=20 MOD GERANNFREQGROUP: ThreshXLow=10; RSRP20-115=-95 2G手机最大发射功率33 此处没有p-MaxGERAN 不考虑功率补偿 异频小区，优先级可以相同，也可以高低优先级。CellReselectionPriority=7 MOD EUTRANINTERNFREQ: CellReselPriorityCfgInd=CFG, CellReselPriority=7; 相同的话，R准则 对服务小区的信号质量等级R_s和邻区的信号质量等级R_n计算公式如下： R_s=Qmeas,s+Qhyst R_n=Qmeas,n-Qoffset Qhyst在sib3里 对异频小区，Qoffset为SIB5中广播的q- OffsetCell（通过参数EUTRANINTERFREQNCELL.CellQoffset）和q-OffsetFreq （通过参数EUTRANINTERNFREQ.QoffsetFreq）之和，如果SIB5中未广播q- OffsetCell，UE取q-OffsetCell为0。两个参数都在sib5里，如果是0的话都不会下发。 MOD EUTRANINTERNFREQ: QoffsetFreq=dB0; MOD EUTRANINTERFREQNCELL: CellIndividualOffset=dB0; q-RxLevMin=-64*2=-128 MOD EUTRANINTERNFREQ: QRxLevMin=-64; threshX-High=11*2=22 MOD EUTRANINTERNFREQ: ThreshXhigh=11; threshX-Low=17*2=34 MOD