文献报告-.pptVIP

Core–shell polymers: a review;Content;1.Introduction;2. Classification ;2.1 Core–shell polymer hydrogels;2.1.1 NIPAM based CSP hydrogels;2.1.2 Non-NIPAM CSP hydrogel;2.2 Non-hydrogel core–shell polymer;;3. Preparation methods of core–shell polymers;;;3.1 Emulsion polymerization;The most significant difference between batch and semi-batch emulsion polymerization is the polymerization ingredients; Advantage of Semi-bath: (1) Good temperature control with extra cooling of polymerization process. (2) Easy to control polymerization rate by keeping process ‘starved’. (3) Flexible control of molecular weight. (4) Good polymer composition control.;Example two;Example three;3.2 Dispersion polymerization;3.3 Other techniques to prepare core–shell polymers;Example two;Mu et al. prepared a monodisperse and multilayer core–shell (MMLCS) via surface cross-linking emulsion polymerization.;Example four;4. Development of latex particle morphology of CSP;4.1 Effect of cross-linking;4.2 Radical penetration and diffusion;5. Characterizations;6. Recent study on core–shell polymers;Example two;Example three;Example four;Example five;;CSP features;8. Conclusion;谢 谢