EX5EX10-CO2.PDFVIP

EX5/EX10-C O 2 10.6μm C O 2 TEA Laser The laser is an all metal/ceramic device and uses the most advanced design of any commercial TEA CO2 laser. Long gas lifetime Corona PreIonization On-Board Vacuum Pump Long life optics GAM LASER, INC Hard Science EX10-C O 2 GAM LASER, INC Hard Science High Power and High stability The EX10-CO2 laser is designed to provide high power industrial laser performance in a low cost, high reliability system. The unique linear design of GAM LASER products allows power scaling to be achieved at low incremental cost. The EX10-CO2 provides the first cost effective high power laser. The EX10-CO2 gives repetition rates to 100Hz .The laser gives up to 100W output power. Exceptional dynamic and static gas lifetime is obtained from the total metal/ceramic design and corona preionization system with over 5 million pulses to 50% energy and 8 weeks static gas lifetime. The laser is an all metal/ceramic device and uses the most advanced design of any commercial laser. The laser of course includes standard features such as active thermal stabilization, constant power and energy control, automatic refill and automatic gas control. The laser can be completely controlled from a Windows software package. An Active-X is available for those wishing to write custom software for the laser, or to incorporate the laser into a larger software routine. The enhanced industrial software control package is standard with the EX10-CO2 laser. High efficiency discharge This 100Hz model is air cooled. The EX10-CO2 laser is designed to give high electrical to optical conversion efficiency. The high discharge efficiency reduces the load on the heat transfer system and allows air cooled operation at 100Hz. Economical Operation The EX10-CO2 is designed to allow simple and low cost replacement and refurbishment of the laser chamber. This gives minima