Telaire6613CO2Module.PDFVIP

GE Sensing Inspection Technologies Telaire 6613 CO2 Module Small, Compact CO2 Module Designed to Integrate Into Existing Controls and Equipment The Telaire? 6613 CO2 Module is designed to meet the volume, cost, and delivery expectations of Original Equipment Manufacturers (OEMs). The module is ideal for customers who are familiar with the design, integration, and handling of electronic components. All units are factory calibrated to measure CO2 concentration levels up to 2000 ppm. Telaire dual channel sensors are available for higher concentrations. By joining GE Sensing Inspection Technologies, Telaire? can now o?er high-volume manufacturing capabilities, a global sales force, and additional engineering resources to support your sensing application needs. Features ? An a?ordable gas sensing solution for OEMs. ? A reliable sensor design based on 15 years of engineering and manufacturing expertise. ? Flexible CO2 sensor platform designed to interact with other microprocessor devices. ? Eliminates the need for calibration in most applications with Telaire’s patented ABC Logic? software. Lifetime calibration warranty. g Telaire 6613 CO2 Module Speci?cations Method Non Dispersive Infrared (NDIR), gold plated optics, di?usion or ?ow through sampling (with Telaire’s Patented ABC Logic Self Calibrated Algorithm) Measurement Range 400 to 2000 ppm Dimensions 2.25 in X 1.365 in X 0.60 in (57.15 mm X 34.67 mm X 15.24 mm) Accuracy* @72°F (22°C) when compared against a certi?ed factory reference ±40 ppm + 2% of reading up to 1250 ppm Temperature Dependence 0.2% FS per °C Stability 2% of FS over life of sensor (15 year typical) Pressure Dependence 0.135 of reading per mm Hg Calibration Interval Not required Response Time 2 minutes for 90% step change typical Signal Update Every 4 seconds Warm Up Time ? 2 minutes (operational) ? 10 minutes (maximum accuracy) Operating Conditions ? 32°F to 122°F (0°C to 50°C) ? 0 to 95% RH, non condensing Storage Conditions -40°F to 158°F (-40