C语言常用代码笔记不经过第三变量交换数值.docVIP

#includestdio.h #includestdlib.h #includestring.h #includemalloc.h #includetime.h #includeconio.h #includewindows.h 要求,如:开幕清屏;闭幕清屏;上清屏;下清屏;中清屏.为此,这里 用C语言编制了几个子,用于中时,既可达到清屏目,有能增加屏幕艺术美观. 子及演示: #stdio.h #dos.h #conio.h void goto_xy( x, y); void dcls( x1, x2, y1, y2); void bcls( x1, x2, y1, y2); void kcls( x1, x2, y1, y2); void recls( x1, x2, y1, y2); void zcls( x1, x2, y1, y2); void puta(void); /*--------------演示---------------------*/ { puta; getch; dcls(0,4,0,79); getch; puta; getch; bcls(0,25,0,79); getch; puta; getch; zcls(0,25,0,79); getch; } /*********center clear screen(中心清屏)***********/ void zcls( x1, x2, y1, y2) { x00,y00,x0,y0,i,d; ((y2-y1)(x2-x1)){ d=(x2-x1)/2; x0=(x1+x2)/2; y0=y1+d; y00=y2-d; for(i=0;i(d+1);i) recls((x0-i),(x00+i),(y0-i),(y00+i)); delay(10); } { d=(y2-y1)/2; y0=(y1+y2)/2; x0=x1+d; x00=x2-d; for(i=0;id+1;i) recls(x0-i,x00+i,y0-i,y00+i); delay(10); } } /************* clear rectangle side(矩形边清屏)***********************/ void recls( x1, x2, y1, y2) { i,j; for(i=y1;iy2;i){ goto_xy(x1,i); putchar(\ \); goto_xy(x2,i); putchar(\ \); delay(10); } for(j=x1;jx2;j){ goto_xy(i,y1); putchar(\ \); goto_xy(j,y2); putchar(\ \); delay(10); } } /******************open screen clear(开屏式清屏)*********************/ void kcls( x1, x2, y1, y2) { t,s,i,j; t=s=(y1+y2)/2; for(;t=y2;t,s--) for(j=x1;jx2;j){ goto_xy(j,t); putchar(\ \); goto_xy(j,s); putchar(\ \); delay(10); } } /*****************close screen clear*****闭幕式清屏*******************/ void bcls( x1, x2, y1, y2) { t,s,j; t=y1; s=y2; for(t=y1;t(y1+y2)/2;t,s--) for(j=x1;jx2;j){ goto_xy(j,t); putchar(\ \); goto_xy(j,s); putchar(\ \); delay(10); } } /******************bottom screen clear(自下清屏)********************/ void dcls( x1, x2, y1, y2) { t,s,j,i; t=s=(y1+y2)/2; for(j=x2;jx1;j--) for(i=y1;iy2;i){ goto_xy(j,i); putchar(\ \); delay(10); } } /******************设置光标子******************/ void goto_xy( x，int y) { union REGS r; r.h.ah=2; r.h.dl=y; r.h.dh=x; r.h.bh=0; 86(0x10,r,r); } /*************在屏幕上打出连串a字母用于演示*****/ v