CANoe Usage.pptxVIP

30 March 2017 1 Author, ? Continental AG CAN BUS Data Capturing 19 5 30 March 2017 2 Author, ? Continental AG CAN BUS Data Capturing 19 5 Training Description： This training is to illustrate CANoe Test Platform Building procedure and CAN BUS data capturing and Analysis. Training goal: Share the experience of CANoe relevant test and simulation. Training Description 30 March 2017 3 Author, ? Continental AG 30 March 2017 4 Author, ? Continental AG CAN BUS Data Capturing 19 5 Open CANoe V8.0, Click File - New Configuration then select the VectorIL_CAN.tcn template. CAN Configuration File Building 30 March 2017 5 Author, ? Continental AG Configure the Hardware Features: Click Configuration - Network Hardware Select the right Baud Rate. CAN Configuration File Building 30 March 2017 6 Author, ? Continental AG Save the Configuration File: Click File - Save Configuration to rename and save the file under a folder. CAN Configuration File Building 30 March 2017 7 Author, ? Continental AG 30 March 2017 8 Author, ? Continental AG CAN BUS Data Capturing 19 5 CAN database contains all the message that will be Transmitted or Received on CAN Bus. CAN database can be created via CANoe, Click Tools - CANdb++ Editor to open the database editor: CAN Database Building 30 March 2017 9 Author, ? Continental AG In CAN database Editor Click File - Create Database and select the Template Vector_IL_BasicTemplate.dbc and click OK to rename the database file and save it. CAN Database Building 30 March 2017 10 Author, ? Continental AG CAN CANdb++ Editor will appears as below: CAN Database Building 30 March 2017 11 Author, ? Continental AG Signal Creating： Define the signal as below, For example Engine Co