基管对单排矩形翅片管流动与换热特性的数值模拟 毕业论文 .docVIP

基管对单排矩形翅片管流动与换热特性数值模拟 随着我国科技、经济的迅速发展能源紧缺，对各个领域换热的研究，而平直翅片管式换热器作为热力系统和制冷空调装备中的一个重要部件，所以对它的研究受到了科研人员的青睐。平直翅片管式换热器有着诸多优点，承受高温高压、适应性强、工作可靠、制造简单、生产成本低、选材范围广等使它在能源、化工、冶金、石油等领域得到广泛的应用。因而，对其翅片管流动与换热特性的研究具有十分重要的意义。 本文通过运用CFD软件对单排矩形翅片管换热特性进行了数值模拟，探讨基管相对于翅片前缘位置的改变对翅片表面的对流换热、翅片效率产生的影响。通过数值模拟分析得出入口流速、翅管管径以及基管离翅片入口段的不同位置l/d对流动换热的影响，得到了雷诺数Re与努塞尔数Nu、阻力系数f的关系，分析翅片位置、翅管管径等因素对平直翅片管流动与换热性能的影响，得出换热性能最优的翅片结构，为工业应用上平直翅片管结构的设计和改进、优化分析提供理论依据。 ：数值模拟，平直翅片管，翅片效率，流动换热 Single Row of Rectangular Base Pipe Finned Tube Flow and Heat Transfer Characteristics Simulation With the rapid development of science and technology, economy and the growing shortage of energy research in all areas of heat transfer equipment is widely used to strengthen the technology more and more urgent, straight fin and tube heat exchanger as a thermodynamic system and refrigeration and air conditioning equipment is an important component, so its research favored by researchers. Straight fin tube heat exchanger has many advantages, withstand high temperature and pressure, adaptable, reliable, simple to manufacture, low production cost, wide selection range to make it widely in the energy, chemical industry, metallurgy, oil and other fields application. Thus, the great significance of the research and its heat transfer characteristics of finned tube flow. By using CFD software on a single row of rectangular fin tube heat transfer characteristics are simulated to explore the impact of the base pipe with respect to the change in position of the leading edge of the fin on the convective heat transfer fin surface, fin efficiency generated. Numerical simulation analysis was the entrance flow rate, pipe diameter and wing base pipe from different locations l inlet section of the fin / d impact on the flow and heat transfer, has been the Reynolds number Re and the Nusselt number Nu, the relationship between the resistance coefficient f impact on the straight fin tube flow and heat transfer performance analysis of the