灯具装饰灯盖模流分析及模具设计--材料专业毕业设计.docVIP

XXXX范大学 XXXXXX University 毕 业 设 计 专 业：材料成型及控制工程 班级学号： 学生姓名： 指导教师： 二O一七年六月 XXXX大学本科生毕业设计 灯具装饰灯盖模流分析及模具设计 Molding Analysis and Mold Design on the Lighting decorative lamp cover 专业班级：材料 学生姓名： 指导教师： 院 别：机械工程学院 2017年6月 摘 要 本设计是的注塑模具设计Pro/ENGINEER在注塑模具设计中的高效与便捷。通过对塑件结构、材料、用途及参数等进行分析，确定模具采用一模两腔的布局；采用侧浇口，保证塑件质量；采用顶杆和强制顶出的方式，设计流程还包括体积块、浇注系统、冷却系统、侧抽芯机构的详细介绍。利用Moldflow Plastics Insight 6.1对塑件进行CAE分析，根据分析的最佳浇口位置，最终在设计时根据合理和可靠性做最佳的选择，保证在同样的设计条件下获得更优的注塑质量。对塑件的注塑时间和模具的注塑温度以及冷却系统的分析，都将对今后的设计提供参考。根据参数选取相应的注塑机，并验证模具结构设计的合理性。 关键字：灯具装饰灯盖；注塑模具；一模两腔；侧向抽芯机构 ABSTRACT The design of decorative lamps lamp cap injection mold design, CAD / CAM / CAE technology in the industrial application of mold growing maturity of the shell of Property on the Lighting decorative lamp cover in this mold design, fully embodies the Pro / ENGINEER in the injection mold design and convenient and efficient. The structure of plastic parts, materials, use and analysis of parameters to determine the mold cavity using a two-mode layout; the use of easy to remove the side gate potential at gate-type, and ensure the quality of plastic parts; the introduction of the use of mandrel method to ensure a smooth introduction of force, so that pieces of hard plastic deformation occurred. Design process also includes the surface, gating system, cooling system, the side core pulling bodies, the introduction of bodies in detail. On the use of CAE Moldflow Plastics Insight 6.1 analysis carried out, based on an analysis of the best gate location, the ultimate in design based on reasonable and reliable to do the best choice to ensure that the design is more excellent quality of injection in the same condition. Analysis is on mold injection time and temperature, and cooling system of plastic parts, all will provide a reference for future design. According to the parameters to select the corresponding the injection moldi