操作手柄塑料件模流分析及模具设计--材料专业毕业设计.docVIP

XXXX大学 XXXXXX University 毕 业 设 计 专 业： 材料成型及控制工程 班级学号： 学生姓名： 指导教师： 二〇一七年六月 XXXX大学本科生毕业设计 操作手柄塑料件模流分析及模具设计 The Mold Flow Analysis and Mold Design of the Operating Handle 专业班级： 学生姓名： 指导教师： 学 院：机械工程学院 2017 年 6 月 摘 要 本次设计的是“塑料”，主要介绍了塑料的设计思路和加工过程，主要设计的是的注塑模的设计，塑料具有重量轻、耐腐蚀老化、强度高、使用寿命长，制作方便、价格低廉等特点，是值得人们信赖、喜欢用的产品，它具有非常大的发展前途。本次设计采用的是注射成形，注射成型是塑料成型的一种重要方法，它主要适用于热塑性塑料的成型，可以一次成型形状复杂的精密塑件。本课题就是将作为设计模型，将注射模具的相关知识作为依据，阐述塑料注射模具的设计过程。本设计对塑料进行的注塑模设计，利用UG软件对塑件进行了实体造型，对塑件结构进行了工艺分析明确了设计思路，确定了注射成型工艺过程并对各个具体部分进行了详细的计算和校核。如此设计出的结构可确保模具工作运用可靠，保证了与其他部件的配合。最后用autoCAD绘制了一套模具装配图和零件图。 本课题通过对塑料的注射模具设计，巩固和深化了所学知识，取得了比较满意的效果，达到了预期的设计意图关键词：塑料模具；注射成型；模具设计ABSTRACT The design of plastic operating handle, mainly introduces the plastic operating handle design ideas and process, the main design of the operating handle of the injection mold design, plastic operating handle have are light weight, orrosion-resistant aging, high strength,long service life, production and low prices, is worthy of trust, like to use the product, it has a very large future development. Plastic injection molding molding is an important method, which is primarily applicable to thermoplastic plastic molding, Molding can be a complex shape of precision plastic parts. Is the topic of Operating handle plastic as a design model, the injection mold-related knowledge as a basis for elaborate plastic injection mold design process. The design of Operating handle plastic for the injection mold design, the use of software UG plastic parts for the solid modeling, Plastic Parts of the structure analysis for the process，and mold flow analysis. Defined the design, determine the injection molding process as well as some specific details of the calculation and verification. The design of such a structure can be used to ensure reliable Die work to ensure that the other parts of the tie. Finally, a set of auto mapping mold parts and assembly pla