刀片相关网络技术11_319571_Integrity_BL8x0c_Legacy_FW_20-Jan-2012.pptxVIP

HP Integrity BL8x0c Legacy Server Blades Firmware Rev.12.11 HP Integrity Server Blades L200 Service and Support Module objectives Describe where the different firmware is located in the system Check existing firmware versions on the server blades and the OA Check the available firmware revisions on the Business Support Center site and the compatibility of all firmware versions Choose the appropriate installation methods for your Integrity BL8x0c system and download the firmware Install the server firmware using the HP OFM ISO image and the EFI image Demonstrate how to cancel a pending firmware update Demonstrate how to manually swap system firmware ROMs and how to copy an image from one ROM to another Identify and troubleshoot firmware problems Firmware locations HP Integrity BL8x0c systems use the following firmware: Server blade firmware System firmware (SFW) PDH (MHW) FPGA, UCIO (vKVM FPGA), PRS, and PIC firmware iLO 2 (MP) firmware (iLO FW) BMC firmware Embedded NICs (LOM) firmware SAS controller firmware Mezzanine cards c-Class enclosure firmware Onboard Administrator (OA) firmware Interconnect module firmware, including Virtual Connect (VC) modules Fan firmware Power supply firmware System firmware stored in two locations Shell fwconfig SYSTEM FIRMWARE CONFIGURATION Image A Revision: 4.21 [4907] *Image B Revision: 4.21 [4907] * Indicates active system firmware image Shell ROM A ROM B – Active SFW image Determining firmware versions Server blade firmware versions Hidden slide for server blade fw versions (1/2) Hidden slide for server blade FW versions (2/2) OA firmware versions Hidden slide for OA FW versions Interconnect module firmware versions firmware update methods Firmware update options The firmware on Integrity BL860c/BL870c server blades can be updated in the following ways: From a running operating system (HP-UX, Microsoft Windows, Linux, and OpenVMS) Download, burn, and boot an ISO image Run an EFI application Use a USB key Use vM