Gas Metal Arc Welding (Quality) EGE-MOS-GL-14-04-E.pdfVIP

Gas Metal Arc Welding (Quality) Specification Proprietary and Confidential AESM-MOS-SP-02-E Rev 02 Page 1 of 20 Master files are stored electronically and are available to all team members. Printed copies of the master files are for reference only. Revision Release Date Description of Changes 01 01-April-2013 ? Initial release (consolidates EGE-MOS-GL-14-04 (JCI), KN 135 (Keiper) and QMB8.1_R02_009 H10) 02 01-June-2014 ? Added AME / SMME responsibility (3.0 4.8) ? Clarified requirements / added examples (4.4.6, 4.4.7, 4.6.1, 4.6.2, 4.6.5, 4.7.2 4.7.3) ? Added Repair / Rework requirements (4.8 6.0) ? Revised Gap requirements (4.6.5) Process Team Vice President PBU Metals Quality Exec Director Global Manufacturing Engineering Director Metals China Harald Arndt Ralf Klein John Phillips Approved Released Mike Bartschat Bob Jones Electronic copies valid without signature 1.0 Purpose This specification defines the requirements for assessing and analyzing Gas Metal Arc Welding (GMAW) joints. 2.0 Scope This specification applies to all worldwide Metals locations of the Automotive Experience business of Johnson Controls. 3.0 Responsibility The Welding Engineer / Advance Manufacturing Engineer (AME) / Subject Matter Manufacturing Expert (SMME) is responsible for approving deviations to welding standards. The Welding Engineer / AME / SMME and Product Engineer are responsible for evaluating nonconformances and determining if rework is permissible. The Product Engineer is responsible for documenting the design weld thickness on the drawing. The AME is responsible for the repair / rework concept. Gas Metal Arc Welding (Quality) Specification Proprietary and Confidential AESM-MOS-SP-02-E Rev 02 Page 2 of 20 4.0 Process 4.1 General: The methods described in this specification are in accordance with DIN EN ISO 4063: Standard process of JCI AE is Ref.No.135. Table 1: Method-Reference Number-Short Refer