自动化论文基于plc的隧道灯光控制系统设计毕设论文.docVIP

二 ○ 一五 届 毕 业 论 文 基于PLC的隧道灯光控制系统设计 学 院：电子与控制工程学院 专 业：自动化（交通信息与控制） 姓 名： 学 号：201132010225 指导教师： 完成时间：2015年6月10日 二〇一五年七月 摘 要 随着我国山区高速公路的快速建设和发展，隧道工程在公路工程建设中所占的比例越来越大，与此同时，隧道照明系统的设计和维护也变得越来越重要。良好的隧道照明设计就是考虑隧道长度、路面类型、公路线型、内饰、有无人行道、设计时速、交通量和汽车种类等相关因素，进行隧道光源光色、灯具选择，灯具排列布置，合理的诱导照明设计及照明控制设计，达到满足驾驶员交通安全的视觉信息采集，提高驾驶的安全性和舒适感，并最终达到降低运营成本的目的。 本论文首先介绍了本文研究背景和意义，国内外研究现状和发展趋势，并且点出本文研究内容是如何确定的。然后对隧道照明回路亮度进行了计算分析，并且对了及对比了可编程控制器，功能，的简绍 本次课设选用设计了通过手动控制和分时序控制对隧道照明系统进行控制PLC仿真手动和自动控制以及手动控制下的，多云，，夜间，更夜控制的仿真结果了充分的分析 关键词：公路隧道，隧道照明，仿真模拟 Abstract With the rapid construction and development of our country mountainous area highway, tunnel engineering in the highway engineering construction occupies the proportion is more and more. At the same time, the design of tunnel lighting system and maintenance becomes more and more important. Good tunnel lighting design is to consider the factors related to the length of the tunnel, and the type of the road, road shape, interior, sidewalk, design speed, traffic volume and vehicle types such as, tunnel of color of light source, lamps and lanterns, lamp arrangement, reasonable induction lighting design and lighting control design, to meet the visual information gathering of drivers traffic safety, improve the driving safety and comfort, and eventually reach to reduce operating costs. This paper first introduces the background and significance of this study, domestic and foreign research status and development trends, and point out how the content of this research is determined. Then the brightness of the tunnel lighting circuit are detailed calculation and analysis, control and the manual control, at the time to carry out timing and, according to the brightness of inside and outside the hole value automatic control lighting circuit of full automatic control three way, as well as their advantages and disadvantages are analyzed and compared. At the same time, the main detailed analysis of manual control and segmenta