3M静电测试仪说明书.pdfVIP

1 / 11MO 0688-0201 740 wrist strap + shoe tester 3 o.k. 1 2 3 740 Wrist strap + shoe tester Operating Instructions MO 0688-0201February, 2001 2 / 11 MO 0688-0201 740 wrist strap + shoe tester 3 o.k. 1 2 M? M? 2 - 5 - 10 - 35 - - 10 - 35 - 50 - 100 on / off + - Output Rmax DC 24?30 V / 150 mA II. Declaration of Conformity The 740 Wrist Strap and Shoe Tester is in conformity with the regulations of the EMC- directive 89/336/EWG. The following standards have been taken into account while designing and manufacturing the instrument: EN 60204-1/85, EN 60204-1/91, EN 61010 (Safety), EN 50082-1/92 and EN 50082-2/92. I. General Personnel grounding devices such as wrist straps and conductive footwear are the primary method to minimise charge generation on the human body. They must be able to drain this charge as rapidly as it is generated. For this reason, it is important to test wrist straps and conductive footwear on a regular basis to ensure they are functioning properly and that the test results can be recorded LED for ?too low resistance? Ground cord 4 mm stud Contact plate for wrist strap test Socket for wrist strap Ground Socket Output signal for external devices e.g. - data transfer to PC, electrical door opening system, acoustic signal, etc. LED Upper limit selection for wrist strap and shoe test Socket for shoe electrode Connection for AC/DC transformer On / Off switch Contact plate for shoe test LED for ?too high resistance? 3 / 11MO 0688-0201 Rmax III. Description The 740 wrist strap and shoe tester is an electronic test instrument which is easy to operate and designed to be wall mounted. An AC/DC - transformer is supplied. The 740 switches off automatically after non-use for approximately 30 minutes. The unit consists of two measurement circuits with an open circuit test voltage of 20 V for wrist strap and shoe test applications. For wrist strap and footwear testing, a minimum threshold resistance of 750 k? is set internally. The desir