4-20mA hart pressure transmitter.pdfVIP

. 1 . DMP305X-TSF-H monosilicon gauge pressure transmitter 2017.01.V1.0 Vertical installation Horizontal installation Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve Description Product introduction DMP305X monosilicon pressure transmitter is a high performance pressure transmitter with international leading technology meticulously designed by LEEG instrument, using the worlds most advanced monosilicon pressure sensor technology and patent encapsulation technology. monosilicon pressure sensor locates on the top of the metal body and stay away from the medium interface to realizes mechanical isolation and thermal isolation. Glass sintering sensor wire realizes high strength electrical insulation of metal base and improves the capability of flexibility of electronic circuit and transient voltage resistance protection. All these original encapsulation technologies enable DMP305X to easily cope with extreme chemical occasion and mechanical load, and own strong resistance to EMI, sufficient to respond to the most rigorous industrial environment applications, which are the genuine invisible instruments. Monosilicon pressure transmitter Main parameters Pressure types Gauge pressure Measuring range 1kPa-10MPa, please refer to the ordering information chapter Output signal 4-20mA, 4-20mA+HART,customer Reference accuracy ± ±0.075% URL, 0.05% URL Measuring medium Liquid, gas, or steam flow as well as liquid level, density and pressure Field of application Pressure, level Approvals . 2 . Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve Including linearity(BFSL), hysteresis and repeatability. calibration temperature: 20℃±5℃ Linear output accuracy TD≤10 (Note1) ±0.075%URL Nominal value: 6kPa, 40kPa 250kPa, 1MPa 3MPa, 10MPa Max value ±0.0075%URL Not