A7VK 手动变量泵 英文.pdfVIP

RE 94010/04.2013, Bosch Rexroth AG Features ? Compact design ? Reduced dimensions and mass in comparison to A2VK ? Mounting flange, drive shaft and functions identical to A2VK, thus easy to replace ? Increased corrosion protection through special surface treatment ? Manual adjustment with prescision display and clamp unit to prevent accidental adjustment ? Double shaft sealing made of special material and flushing chamber to identify damage and protect envi- ronment ? Improved volumetric efficiency through robust rotary group using proven axial tapered piston technology ? Optionally available with mounted high-pressure relief valve ? Low noise level Closed design (A7VKG) ? High permissible filling pressure for highly-viscous media or hydraulic fluid by separating the filling channel and pump housing ? Case drain fluid must be discharged Open design (A7VKO) ? The housing is connected to the suction chamber. A case drain line between the housing and reservoir is not requires Note The axial piston pump is approved for pumping polyure- thane components (polyol and isocynate). ? Sizes 12, 28, 55, 107 ? Nominal pressure 250 bar ? Maximum pressure 315 bar ? Open and closed design Axial piston variable pump A7VK Series 10 Metering pump for polyurethane components RE 94010 Issue: 04.2013 Replaces: 03.2009 Inhalt Ordering code 2 Operating pressure range 3 Hydraulic fluids 4 Technical data 4 MA control 5 Dimensions size 12 – open design 6 Dimensions size 12 – closed design 8 Dimensions size 28 – open design 10 Dimensions size 28 – closed design 12 Dimensions size 55 – open design 14 Dimensions size 55 – closed design 16 Dimensions size 107 – open design 18 Dimensions size 107 – closed design 20 High-pressure relief valve direct operated 22 Installation instructions 23 General instructions 24 Bosch Rexroth AG, RE 94010/04.2013 2 A7VK Series 10 | Axial piston variable pump Ordering code Ordering code 01 02 03 04 05 06 07 08 09 10 11 12 13 A7VK MA / 10