流量为2500kgh二甲胺换热器的设计 毕业论文.doc

摘要 换热器又被叫热量交换器，是一种进行冷热流体之间的热量传送的设备，它是完成化工等生产过程中交换热量必须用到的设备，在工厂中意义非凡。换热器可以是一种独立的设备，例如加热器、冷却器和凝汽器等等。换热器是两种温度不同的物料在一个设备内相互交换热量，最终达到将物料冷却，或者将冷物料加热为目的的设备。换热器是化工生产中最最常用的一种机器，它的主要作用是进行几种介质之间的热量传递。常见的换热器有：浮头式换热器、固定管板式换热器、填料函式换热器、U型管式换热器、蛇管式换热器、双壳程换热器、单套管换热器、多套管换热器、外导流筒换热器、折流杆式换热器、热管式换热器、插管式换热器、滑动管板式换热器等[1]。本换热器是蒸汽换热器在成产中是非常常见的设备，该换热器有耐高压的优点、价格低廉、清洗方便不宜结垢的优点。 设计任务说明书中所给定的条件是壳程介质为二甲胺，温度从一开始的49.96℃、0.9MPa进行冷凝冷凝，它的流量是2500kg/h。管程中的介质是水，冷却水温度从一开始的33℃升高到了43℃、压力保持在0.6MPa。完成了压降计算、强度计算、开孔补强、管箱短节壁厚计算等。在强度设计中，依据进行筒体、封头强度设计及校核，依据流量进行入口接管、出口接管等管口直径的选择，依据等面积补强法进行开口补强计算。本设计选择管板延长兼做法兰，依据中的弹性支撑假设对管板进行设计和校核，管板与换热管的连接方式为焊接，拉杆与管板为螺纹连接结构。同时，进行了卧式容器鞍座校核。 本设计充分的利用材料，适用比较多的场合。在同样的换热器中此换热器十分的廉价、安全。所以该换热器在工厂中占有重要位置。 关键字: 固定管板； 换热器； 不同物料；热交换； 补强 Abstract Heat exchanger called heat exchanger again, it is a kind of cold and hot fluid between the heat transfer equipment, it is a complete exchange of heat must be used in the process of chemical production equipment, the special significance in the factory. Heat exchanger can be an independent device, such as a heater, cooler and steam condenser and so on. Temperature heat exchanger are two different materials in a heat exchanging equipment, eventually achieve the material cooling, or heating equipment for the purpose of cold material. Heat exchanger is by far the most commonly used in the chemical production of a machine, its main function is to heat transfer between several kinds of media. Common heat exchanger are: of floating head heat exchanger, the fixed tube plate heat exchanger, the stuffing box type heat exchanger, u-shaped tube heat exchanger, coil heat exchanger, single and double shell side heat exchanger tube heat exchanger and tube heat exchanger and diversion tube heat exchanger, rod baffle heat exchanger, heat pipe heat exchanger, heat exchanger intubation, sliding tube plate heat exchanger, etc[1]. This heat exchanger is steam condenser is very common in into during equipment, the heat exchanger has the a