MU2861键盘控制器英文中性.pdf

KEYBOARD CONTROLLER OPERATION INSTRUCTION Copyright 2003-2007. All Rights Reserved. Operating Instructions of Keyboard Controller Page 1 of 18 Precautions: 1. Installation Site Keep away from heat source and high temperature environment. Avoiding exposing to direct sunlight. Don’t install the machine at site with poor ventilation, ensuring proper radiation. Don’t site the machine where is inflammable and explosive, preventing from electric shock and fire. Avoid violent impaction and vibration. Don’t install the machine at site with tough quake. Don’t move it where it is too cold and too hot in case of dewing inside and service life shorten. 2. Avoiding Electric Shock and Fire Don’t touch power switch and the machine with wet hands. Don’t spray liquid on the machine, protecting the machine from short circuit and fire. Don’t put other equipment directly on the top of the machine. Important Notes : Don’t remove the enclosure without authorization in case the machine is damaged. Maintenance shall be done by qualified technical personnel at authorized maintenance site. Don’t use strong detergent to clean the machine. Use dry cloth if there is dust. Don’t run the machine as the voltage of power supple is too high or too low. Read carefully the operation instruction before operation, making sure that you understand how to operate the machine. Keep the operation instruction properly for future reference. Please contact the local authorized maintenance station if maintenance is needed. Environment Protection : The machine meets national standard for electromagnetic radiation and does no harm to human body. Statements: The publication and distribution of the product should be used by the original buyer under the terms of license; No individual or organization shall partly or entirely copy, reproduce or translate the product into other types of machine-readable electronic