S202S01;S202S01F;中文规格书,Datasheet资料.pdf

S102S01 Series S202S01 Series ■ Features IT(rms)≤8A, Non-Zero Cross type SIP 4pin Triac output SSR 1. Output current, IT(rms)≤8.0A 2. Non-zero crossing functionary 3. 4 pin SIP package 4. High repetitive peak off-state voltage (VDRM : 600V, S202S01 Series) (VDRM : 400V, S102S01 Series) 5. High isolation voltage between input and output (Viso(rms) : 4.0kV) 6. Lead-free terminal components are also available (see Model Line-up section in this datasheet) 7. Screw hole for heat sink ■ Description S102S01 Series and S202S01 Series Solid State Relays (SSR) are an integration of an infrared emitting diode (IRED), a Phototriac Detector and a main output Triac. These devices are ideally suited for controlling high voltage AC loads with solid state reliability while providing 4.0kV isolation (Viso(rms)) from input to out- put. 1 Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. S102S01 Series S202S01 Series ■ Agency approvals/Compliance 1. Isolated interface between high voltage AC devices and lower voltage DC control circuitry. 2. Switching motors, fans, heaters, solenoids, and valves. 3. Phase or power control in applications such as light- ing and temperature control equipment. ■ Applications 1. Recognized by UL508, file No. E94758 (as models No. S102S01/S202S01) 2. Approved by CSA 22.2 No.14, file No. LR63705 (as models No. S102S01/S202S01) 3. Package resin : UL flammability grade (94V-0) Sheet No.: D4-A02301EN Date Apr. 28. 2004 ? SHARP Corporation ?Zero cross type is also available. (S102S02 Series/ S202S02 Series) / ? : Do not allow external connection. ( ) : Typical dimensions ■ Internal Connection Diagram 1 1 2 3 4 2 3 4 Output (T