基于单片机的数据采集系统设计_毕业设计.docVIP

摘要 本论文的目的就是设计实现一个具有一定实用性的实时数据采集系统。本文介绍了基于单片机的数据采集的硬件设计和软件设计。数据采集系统是模拟域与数字域之间必不可少的纽带，它的存在具有非常重要的作用。本文介绍的重点是数据采集系统，而该系统硬件部分的重心在于单片机。数据采集与通信控制采用了模块化的设计，数据采集与通信控制采用了单片机AT89C51来实现，硬件部分是以单片机为核心，还包括A/D模数转换模块，显示模块，和串行接口电路。本系统能够对8路模拟量，8路开关量和1路脉冲量进行数据采集。被测数据通过TLC0838进行模数转换，实现对采集到的数据进行模拟量到数字量的转换，并将转换后的数据通过串行口MAX232传输到上位机，由上位机负责数据的接受、处理和显示，并用LCD显示器来显示所采集的结果。对脉冲量进行采集时，通过施密特触发器进行整形后再送入单片机。本文对数据采集系统、模数转换系统、数据显示、数据通信等程序进行了设计。 关键词 数据采集 AT89C51单片机 TLC0838 MAX232 Abstract We should combine with the structure of concrete hardware and characteristics ofrelevant software to design the system.The purpose of this thesis is to design a practicalreal-time data collection system.This article describes the hardware design and software design of the data on which based on signal-chip microcomputer .The data collection system is the link between the digital domain and analog domain.The hardware of the system focuses on signal-chip microcomputer .Data collection and communication control use modular design. The data collected to control with correspondence to adopt a machine 8051 to carry out. It has an very important function. The introductive point of this text is a data to collect the system. The part of hardware’s core is AT89C51, is also includes A/D conversion module, display module and the serial interface.The system can eight analog, eight digital pulse volume and one for data acquisition8 roads were measured the electric voltage to pass the in general use mold-few conversion of TLC0838,the realization carries on the conversion that imitates to measure the numeral to measure towards the data that collect .Then send the data to the host machine through MAX232.the host machine is responsible for data and display, LCD display is responsible display the data. The software is partly programmed with VC++. The software can realize the function of monitoring and controlling the whole system. It designs much program like data-acquisition treatment,date-display and data-communication ect. Keyw