AHB2APB_DataSheet.pdf

i Technical Data Sheet Part Number: T-CS-PR-0005-100 Document Number: I-IPA01-0106-USR Rev 05 March 2007 Technical Data Sheet AHB to APB Bridge (AHB2APB) Document No: I-IPA01-0106-USR Rev 05, March 2007 ? 2003 Cadence Design Systems, Inc. Page ii AHB to APB Bridge (AHB2APB) ?2003 Cadence Design Systems, Inc. All rights reserved Proprietary Notice In the U.S. and numerous other countries, Cadence and the Cadence logo are registered trademarks and Cadence Design Foundry is a trademark of Cadence Design Systems, Inc. All other products or services mentioned herein may be trademarks of their respective owners. Neither the whole nor any part of the information contained in, or the product described in this document may be adapted or reproduced in any material form except with the prior written permission of the copyright owner. The product described in this document is subject to continuous developments and improvements and is supplied AS IS. All warranties implied or expressed including but not limited to implied warranties or merchantability, or fitness for purpose, are excluded. Cadence Design Foundry, Inc shall not be liable for any loss or damage arising from the use of any information in this document, or any error or omission in such information, or any incorrect use of the product. Cadence Design Foundry products are not authorized for use as critical components in life support devices or systems without the express written approval of an authorised officer of Cadence Design Foundry, Inc. As used herein: 1. Life support devices or systems are devices of systems that are (a) intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system or system wh