CCI汽机旁路说明书.pdf

High Pressure Turbine Bypass Valve HBSE? C C I H B S E ? Tu rb in e B yp as s V al ve 2 The Rugged, Compact Steam Conditioning Solution The HBSE? Turbine Bypass Valve by CCI is the standard turbine bypass valve for high pressure bypass systems of combined cycle power plants. With a compact, robust design that easily fits into most existing piping arrangements, it can be installed in any orientation. All components, including the flow diffuser, are removable through the top of the valve making maintenance and inspection quick and easy. The spherical body shape has been designed to avoid material concentrations and abrupt changes of wall thickness, minimizing thermal stress in the valve. In addition, the HBSE? is available as a combined control and safe shutoff valve according to TRD 421. Spring-Loaded Nozzle Desuperheating HBSE? desuperheating features integral spring-loaded water-injection nozzles that optimize water-injection over a wide range of flow rates at low pressures. With a rangeability of up to 50:1, the spring-loaded water-injection nozzles vary the water flow area as required to achieve the fine water droplet size needed for atomization. The spring-loaded water-injection nozzle design provides the smallest water droplet size possible without steam assist. Small-Drilled-Hole Cage Technology The HBSE? Turbine Bypass Valve uses Small-Drilled-Hole Cage (SDHC) technology to provide system noise attenuation through frequency shifting. Frequency shifting is a proven method of noise attenuation recognized by ISA in Technical Standard SP75.07 and by the IEC in Technical Standard 534- 8-3. In frequency shifting, the main flow stream is separated into hundreds of tiny jets. The size of the jets, which are primarily based on hole size, determines the resulting noise frequency – the smaller the size of the jet or drilled hole, the higher the frequency which in turn produces a lower dBA level. Small- Drilled-Hole Cage technology is well