翻译：高频软开关PWM功率变换的发展与现状讲义.docxVIP

Development and Present Status of High Frequency Soft Switching PWM Power Converting Techniques Chen Daolian Yan Yangguang (Nanjing University of Aeronautics Astronautics) Key words: Soft Switch PWM, Zero Voltage Switching, Zero Current Switching Abstract: Recently, power electronics researchers have proposed many soft switching PWM power converting techniques, which combined advantages of both conventional PWM and resonant converters while avoided their respective limitations. In this paper, the features and operating principles of three classes of zero voltage soft switching PWM converters ( zero voltage switching quasi square wave converters, zero voltage switching PWM converters, and zero voltage transition PWM converters) and two classes of zero current soft switching PWM converters ( zero currents witching PWM converters and zero current transition PWM converters) are introduced. INTRODUCTION In order to meet the needs of small size, light weight, high efficiency power supply, and the switch type power conversion technology has from the traditional PWM converter development to resonant converter, quasi resonant converter, multi resonant converter. Recently, there has been soft switching PWM converter. The PWM converter is used to force the switching mode to interrupt the power flux to transform power. The result is that the pulse current and voltage are formed, and the power semiconductor device is subjected to large voltage and large current stress. The resonant converter comprises a conventional series and parallel resonant converter, an E converter, a quasi-resonant converter and a multi resonant converter. Power switch with zero voltage switching (ZVS) or zero current switching (ZCS) commutation, switching losses and switching transient stress than the PWM converter is low. But resonant converters are circulation circuit with high energy and steady-state voltage and current stress and device loss, ZVS or ZCS conditions on the variation range of the supp