----ae-lb-annex-c-comment-resolution.docVIP

 KEYWORDS \* MERGEFORMAT March 2011  TITLE \* MERGEFORMAT doc.: IEEE 802.11-11/0439r0  SUBJECT \* MERGEFORMAT Submission page page 2  COMMENTS \* MERGEFORMAT  IEEE P802.11Wireless LANs Annex C updatesDate: 2011-03-16Author(s):NameAffiliationAddressPhoneemailStephen McCannResearch in Motion200 Bath Road, Slough, Berkshire, SL1 3XE, UK+44 1753 667099smccann@ Overview This document updates TGae 2.0 Annex C with resolved comments received from LB 172. It addresses comments 1192, 1314, 1384 REV HISTORY: R0 – initial revision  Add the following text to Annex C: -- ******************************************************************** -- * Compliance Statements - QFM -- ******************************************************************** dot11QMFCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION This object class provides the objects from the IEEE 802.11 MIB required to manage QoS Management Frame functionality. . OBJECTS { dot11QMFActivated, dot11QMFConfigurationActivated} ::= { dot11Groups ANA} Modify the following text: dot11MFQQMFReconfigurationActivated OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION This is a control variable. It is written by the SME or external management entity. The purpose of dot11MFQQMFReconfigurationActivated is to allow a SME to accept a Policy Change Config rRequest from other STAs and respond with Policy Config Change rResponse. If this variable is set as false then the STA shall not respond to any Policy Changeonfig rRequest it receives DEFVAL { false } ::= { dot11MFQQMFReconfigurationActivated ANA} Modify the following text: dot11MFQQMFPolicyChangeTimeout OBJECT-TYPE SYNTAX Integer MAX-ACCESS read-write STATUS current DESCRIPTION “This is a control variable. It is written by the SME or external management entity. This attribute, indicates the maximum number of TUs that a STA waits to receive a response to an MFQQMF Policy Change rRequest before declaring that the re