fisher4210位置变送器4200系列.pdf

D 2 0 0 3 5 7 X 0 1 2 4200 Series Electronic Position Transmitters The 4200 Series electronic position transmitters com- bine Fisher’s field-proven electronic and mechanical expertise in a versatile, accurate instrument that senses the position of a device, and sends a standard (4 to 20 milliampere) output signal to an indicating de- vice. The instrument is available as a transmitter with integral high and low electronic travel limit alarms, as a transmitter only, or with electronic travel limit alarms only. The instrument can sense the position of rotary or slid- ing stem valves, vents, dampers or other devices. When the instrument is mounted, a potentiometer shaft is mechanically connected to the device to sense mechanical motion. For a standard instrument, a single potentiometer is provided for position input, or an optional dual element potentiometer is available to allow independent electrical operation of the transmit- ter and alarm circuits. The instrument has standard, or long stroke (see fig- ure 5), capabilities for sliding stem actuator applica- tions. For long stroke applications, a multiturn poten- tiometer attached to a cable/pulley assembly is used to sense linear motion of the actuator stem or other devices. The instrument with standard capabilities can also be used on quarter-turn actuators. For instruments equipped with electronic travel limit alarms, individual electronic high and low alarm cir- cuits drive separate high and low alarm SPDT relays. The user adjusts the trip point and deadband of the high and low alarms to the desired travel limits. When the sense potentiometer voltage is higher than the high trip point, the electronic high alarm circuit de-en- ergizes the high alarm relay. When the sense poten- tiometer voltage is lower than the low trip point, the low alarm circuit de-energizes the low alarm relay. The low trip point may be offset from the high trip point by as little as 5% of the remaining span. In the event of a power loss to th