外壳防护等级资料.docVIP

外壳防护等级(IP)仪表外壳防护等级(IP)代码(BS EN60529;1992),由字母IP和后续的两位特征数字表示。 第一位特征数字 防止固体异体异物进入0 无防护 1 固体异物直径大于50mm 2 固体异物直径大于12mm 3 固体异物直径大于2.5mm 4 固体异物直径大于1.0mm 5 防尘 6 尘密例： ??? IP65 即要求具有尘密及对喷水的外壳防护功能 第二位特征数字 防止进水造成有害影响0　　无防护 1 垂直水滴 2 倾角75-90°滴水 3 淋水 4 溅水 5 喷水 6 猛烈喷水 7 短时间浸水 8 连续浸水附加数字：防机械冲击 第三位特征数字（至ＥＮ标准中不包括），适合在某些欧洲国家中通用（参阅法国标准ＮFＣ２０-０１０）： IP外壳防护等级接近等于NEMA防护等级：第三位特征数字（附加） 防机械冲击0　　　无防护 1　　冲击能量为０.２２５焦耳 2　　冲击能量为０.３７５焦耳 3　　冲击能量为０.５　　焦耳 5　　冲击能量为２.０　　焦耳 7　　冲击能量为６.０　　焦耳 9　　冲击能量为２０　　焦耳IP?NEMA301312323R6436512，12K和13684和4X　  IP codesDegrees of Protection Provided by Enclosures This standard describes a system for classifying the degrees of protection provided by the enclosures of electrical equipment. Developed by the European Committee for Electrotechnical Standardization (CENELEC), these standards are designed to numerically rate an electrical product on the level of protection its enclosure provides. By assigning different number codes, the products degree of protection can be identified quickly and easily. In the code IP 54, for example, IP identifies this standard, the 5 describes the level of protection from solid objects, and 4 describes the level of protection from liquids. First Characteristic NumeralDEGREE OF PROTECTION (First Number in Code)Brief DescriptionDefinition0Not protected__1Protected against solid foreign objects of 50mm diameter and greater.The object probe, sphere of 50mm diameter, shall not fully penetrate.12Protected against solid foreign objects of 12.5mm diameter and greater.The object probe, sphere of 12.5mm diameter, shall not fully penetrate.13Protected against solid foreign objects of 2.5mm diameter and greater.The object probe, sphere of 2.5mm diameter, shall not penetrate at all.14Protected against solid foreign objects of 1mm diameter and greater.The object probe, sphere of 1mm diameter, shall not penetrate at all.15Dust-protectedIngress of dust is not