斜齿轮注射模.docVIP

PAGE  PAGE 31 摘要 本次毕业设计主要是对斜齿轮注射模的设计，包括工艺方案的分析及确定、工艺计算、模具结构设计计算等内容。由于该塑件是传动工程件且阻滑纹为圆柱纹，故在设计中主要解决了该塑件的分型面选择、型腔数目的确定、脱模机构的设计。采用了旋转机构、转盘式分型抽芯机构来脱模。从而保证了齿轮的精度、其孔的同轴度和螺旋齿廓的精度。 关键词：注射模；斜齿轮；结构设计 Abstract: The main design graduate of bevel wheel injection, including the analysis of the program and determine, process. Mold design calculations content. Since the drive is plastic parts and pieces of the project profile for the anti-skid cylindrical profile. Therefore, the design is the main settlement of the plastic parts of sub-surface choices, determining the number of cavity, the demoulde