湖北宜昌某公路新建工程设计交通工程论文说明书.docVIP

内蒙古科技大学毕业设计说明书 ____________________________________________________________________________________________________ PAGE   PAGE \* MERGEFORMAT I (此文档为word格式，下载后您可任意编辑修改！) 内蒙古科技大学 本科生毕业设计说明书 题 目：湖北宜昌某公路新建工程设计 学生姓名： 学 号： 专 业：交通工程 班 级： 指导教师：讲师PAGE III 湖北宜昌某公路新建工程设计 摘 要 本设计主要完成了湖北省宜昌某地区新建二级公路的设计，根据给定的资料，通过对原始数据的分析,以及该路段的地质、地形、地物、水文等自然条件,依据《公路工程技术标准》、《公路路线设计规范》等交通部颁发的相关技术指标,设计了以路线、路基、路面，以及涵洞、土石方调配、路基排水防护，交通安全设施等内容为主的道路。 依据远景交通量将路线设计成设计速度为60km of a Yichang Hubei Design Abstract The design is mainly carried out in an area of Yichang new secondary road design, according to the information given by the analysis of the raw data, as well as the section of the geology, topography, terrain, issued by the Ministry and other traffic-related technical indicators, designed to route, roadbed, road and culvert, earthwork allocation, subgrade drainage protection, traffic safety facilities and other content-based way. Vision will route traffic based on a design speed of design 60km of the route, including plan, profile and cross-sectional design. First carried out on paper alignment and correction-oriented line drawing, by comparison to determine the optimal solution; Secondly, according to plane combines local topography, climate, environmental factors were longitudinal design; finally selected 1km conduct cross-sectional design and draw cross-sectional diagram, calculate the earthwork. Subgrade superelevation and widening considered in the design calculations and design for the drainage protection. According to the traffic composition and trends combined with the local situation of road pavement structure building design, after comprehensive consideration on the full range of protection and drainage works to determine the structure and size, type, location, culvert along a preliminary structural design, and basic traffic safety facilities . Highway Engineering design considering the construction of a preliminary estimate, cost a total amount of 4,0