浅孔留矿法采矿方法设计选编.doc

i 摘 要 本设计针对山东某矿山进行开采毕业设计，主要是针对该矿山V-1矿体和V-4矿体的开采方法设计。根据矿体的地质和赋存条件选择竖井开拓作为本设计的开拓方案；采矿方法选用浅孔留矿法；通风系统为抽出式通风，新鲜风流从阶段运输巷道经人行天井及联络道进入采场内部到达上回风平巷排出地表。 关键词：竖井开拓；浅孔留矿法；抽出式通风 ii Abstract This design for a mine in Shandong mining graduation, mainly designed for the mine mining methods V-1 and V-4 orebodies orebody. Select shaft development as a pioneering program in accordance with the design of geological and ore occurrence conditions; mining method selection shrinkage stoping method, divided along strike rule room and pillar mining, room and pillar mining arranged alternately; ventilation system exhaust ventilation, fresh air flow from the stage by the peoples Bank of haulage access road into the interior patio and stope reaches back to the wind drift on the surface discharge. Keywords: shaft development, shrinkage stoping method, exhaust ventilation  目 录 TOC \o 1-3 \h \u  HYPERLINK \l _Toc6010 摘 要 i  HYPERLINK \l _Toc1705 Abstract ii  HYPERLINK \l _Toc25618 1. 矿山概况  PAGEREF _Toc25618 1  HYPERLINK \l _Toc29671 1.1. 矿区的位置、交通及气候条件、隶属关系及企业性质  PAGEREF _Toc29671 1  HYPERLINK \l _Toc4457 1.2. 自然地理与经济概况  PAGEREF _Toc4457 1  HYPERLINK \l _Toc16976 1.3. 设计范围  PAGEREF _Toc16976 1  HYPERLINK \l _Toc520 1.4. 建设条件  PAGEREF _Toc520 2  HYPERLINK \l _Toc16268 1.5. 地区地质  PAGEREF _Toc16268 2  HYPERLINK \l _Toc29997 1.6. 地质储量  PAGEREF _Toc29997 2  HYPERLINK \l _Toc7470 1.7. 地质条件  PAGEREF _Toc7470 3  HYPERLINK \l _Toc20524 1.8. 开采技术条件  PAGEREF _Toc20524 3  HYPERLINK \l _Toc25893 2. 开拓设计  PAGEREF _Toc25893 4  HYPERLINK \l _Toc20368 2.1. 开拓方案??择的原则  PAGEREF _Toc20368 4  HYPERLINK \l _Toc15035 2.2. 开拓方案选择的要求  PAGEREF _Toc15035 4  HYPERLINK \l _Toc18088 2.3. 开拓方法的分类  PAGEREF _Toc18088 5  HYPERLINK \l _Toc5254 2.4. 开拓方法初选  PAGEREF _Toc5254 6  HYPERLINK \l _Toc2089 2.5. 开拓方法初选  PAGEREF _Toc2089 7  HYPERLINK \l _Toc16125 2.5.1. 中段  PAGEREF _Toc16125 8  HYPERLINK \l _Toc10490 2.5