10CPV120;10CPV240;25CPV120;25CPV240;40CPV120;中文规格书,Datasheet资料.pdf

CPV Series • Phase control modules • 120/240 VAC models • 0-5 V DC phase control • Used with Series 1 random-fire solid-state relays PRODUCT SELECTION Description 10 A 25 A 50 A 75 A 90 A 120 VAC 10CPV120 25CPV120 50CPV120 75CPV120 90CPV120 240 VAC 10CPV240 25CPV240 50CPV240 75CPV240 90CPV240 OUTPUT SPECIFICATIONS (voltage) (1) Description 120 VAC 240 VAC Operating Voltage (47-63Hz) [Vrms] 90-140 VAC 180-280 VAC Transient Overvoltage [Vpk] 400 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 OUTPUT SPECIFICATIONS (current) (1) Description 10 A 25 A 50 A 75 A 90 A Maximum Load Current (3) [Arms] 10 25 75 50 90 Minimum Load Current [Arms] 0.04 0.04 0.04 0.04 0.04 Maximum Surge Current (16.6ms) [Apk] 120 250 625 1000 1200 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6 1.6 Thermal Resistance Junction to Case (Rjc) [°C/W] 1.48 1.02 0.31 0.63 0.28 Maximum I²t for Fusing (8.3 msec) [A² sec] 60 260 4150 1620 6000 Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5 0.5 0.5 CONTROL MODULE INPUT SPECIFICATIONS (1) Description DC Control Control Voltage Range 0-5 VDC Minimum Turn-Off Voltage 1.0 VDC Typical Supply Current 1.6 mA @ 5 VDC Nominal Control Input Impedance 1500 Ohm Maximum Turn-On Time [msec] 0.02 Maximum Turn-Off Time [msec] 1/2 Cycle CONTROL MODULE OUTPUT SPECIFICATIONS (Terminal 4B - Input to Relay) (1) Description DC Control Maximum Off-State Operating Voltage 36 VDC Maximum Load Current (Sink) 3.0 mA Maximum On-State Voltage @ 3 mA 0.5 VDC Max. Off State Leakage @ 10 VDC 1.0 µADC GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, signal to load 4000 Vrms Dielectric Strength, signal to Base 4000 Vrms Ambient Operating Temperature Range -30 to 80°C Ambient Storage Temperature Range -40 to 125°C Weight (typical) 3.0 oz. (43g) Encapsulation Themally Conductive Epoxy For Contact information visit our web site. ©