机电专业英语第2版24Unit24A11-AirSystems全空气系统-杨晓磊-机电专业英语答辩.pptVIP

A11-Air Systems Unit 24 全空气系统 A11-Air Systems All-air system provides complete sensible and latent cooling, preheating, and humidification capacity in the air supplied by the system. No additional cooling or humidification is required at the zone, except in the case of certain industrial systems. Heating may be accomplished by some airstreams, either in the central system or at a particular zone. All-air systems are classified into two basic categories: Single-duct systems, which contain the main heating and cooling coils in a series of flow air path；a common duct distribution system at a common air temperature feeds all terminal apparatus. Dual-duct systems, which contain the main heating and cooling coils in parallel flow or series-parallel flow air paths with either 1)a separate cold and warm air duct distribution system that blends the air at the terminal apparatus, or 2)a separate supply air duct to each zone with the supply air blended to the required temperature at the main unit mixing dampers. All-air systems may be adapted to many applications for comfort or process world. They are used in buildings that require individual control of multiple zones, such as office buildings, schools and universities, laboratories, hospitals, stores, hotels, etc. All-air systems are also used virtually exclusively in special applications for close control of temperature and humidity, including clean rooms, computer rooms, hospital operating rooms, research and development facilities, as well as many industrial manufacturing facilities. There are some advantages and disadvantages of All-Air System. Advantages: (1) The central mechanical equipment room location for major equipment allows operation and maintenance to be performed in unoccupied areas and permits the maximum range of choices of filtration equipment, vibration and noise control, and the selection of high quality and durable equipment. (2) Complete absence