年产960万吨连铸坯的全连铸转炉炼钢车间工艺论文40论文41.docVIP

 PAGE \* MERGEFORMAT IX (此文档为word格式，下载后您可任意编辑修改！) 年产960万吨连铸坯的全连铸转炉炼钢车间工艺设计 摘要：本说明书在实习和参考文献的基础上，对所学知识进行综合利用。讲述了设计一转炉车间的方法和步骤，说明书中对车间主要系统例如铁水供应系统，废钢供应系统，散装料供应系统，铁合金供应系统，除尘系统等进行了充分论证和比较确定出一套最佳设计方案。并确定了车间的工艺布置，对跨数及相对位置进行设计，简述了其工艺流程，并在此基础上进行设备计算，包括转炉炉型计算，转炉炉衬计算及金属构件计算，氧枪设计，净化系统设备计算，然后进行车间计算和所用设备的规格和数量的设计，在此基础上进行车间尺寸计算，确定各层平台标高。最后对转炉车间设计得环境和安全要求进行说明。 为了更加详细说明转炉车间设计中的一些工艺及设备??构，本设计穿插了图形，为能够明确、直观的介绍了转炉炼钢车间的工艺布置。 关键词：炼钢，复吹转炉，连铸，方坯，板坯，物料平衡，热平衡，炉型设计 Abstract In practice this manual and reference, based on the comprehensive utilization of the knowledge. Design a workshop about the methods and procedures converter, manual systems such as the workshop mainly supply system, scrap supply system, bulk material supply system, ferroalloy supply system, dust removal system was fully demonstrated and compared to determine a set of best good design. And determine the layout of the workshop process, the number and relative position of the cross design, outlines the process and devices based on this calculation, including the calculation of the converter furnace, converter lining calculation and calculation of metal components, oxygen lance design , purification system equipment, calculation, and then workshop equipment used in the calculation and the number of design specifications and, in this workshop based on the size of calculations to determine the elevation of each floor platform. Finally, the converter workshop designed to explain environmental and safety requirements. For a more detailed description of some of the converter process plant design and equipment in the structure, the design interspersed with graphics, to be able to clear, intuitive introduction to the process of converter steelmaking plant layout. Key Words: Steel, blowing converter, continuous casting, billet, slab, material balance,  目 录  TOC \o 1-3 \h \z \u 1 文献综述  PAGEREF _Toc294767999 \h 1 1.1国外炼钢技术的发展  PAGEREF _Toc294768000 \h 1 1.2钢铁工业在国民经济中的地位和作用  PAGEREF _Toc294768001 \h 1 1.3现代转炉炼钢工艺流程