结构设计原理课程设计-混凝土梁(英文版).docxVIP

Project of Principles of Structure Design Reinforced Concrete Beam Name： Wang Pengzhi Class ： 2011210701 NO. ： 08 SCHOOL OF HIGHWAY COLLEGE CHANG’AN UNIVERSITY DECEMBER 7, 2013 Project of principles of structure design 201121070108 Wang Pengzhi PAGE \* MERGEFORMAT12 Project Known: the member is a concrete T beam (simple support beam), the standard span is Lb=13m, calculating span L=12.6m. The reinforcement distribution placed and section dimensions of normal section flexural capacity are shown in the diagram. Main steel bar is HRB335 (4?32+4?16), As=4021mm2, erection steel bar is HRB335 (2?22), an eight-layer steel skeleton is welded. Concrete is C30, grade Ⅰ environment, λ0=1.1. For support section, shearing calculated value V0 =γ0Vd,0 = 342kN,bending moment calculated value M0 =γ0Md,0 = 0；For mid-span section, shearing calculated value Vl/2 =γ0Vd, l/2 =71.0kN, bending moment calculated value Ml/2 =γ0Md, l/2 = 1000kN.m. Solution: Check of the sectional dimensions To meet the construction requirements, the bottommost layer of steel bar must be through the bearing section. And the effective depth of bearing section is (set the thickness of cover c=38mm) h0=h-35+35.82=946mm 0.51×10-3fcu,kbh0=0.51×10-3×25×180×948=475.65kNγ0Vd,0(=342kN) So, the sectional dimensions meet the construction requirements. Check that if necessary to equip the web reinforcement Mid-span section: 0.5×10-3ftdbh0=0.5×10-3×1.39×180×915=114.76kN Bearing section: 0.5×10-3ftdbh0=0.5×10-3×1.39×180×944=118.34kN So, γ0Vd,l20.5×10-3ftdbh0γ0Vd,0 The stirrup must be used with some zone of mid-span. As for other zones, the construction requirements are suit. Distribution of the envelope diagram of shear force From the envelope diagram of shear force and Vl2= γ0Vd,l2, V0= γ0V0 and Vx= γ0Vd,x=0.5×10-3ftdbh0=114.76kN. The distance between Vx section and mid-span section can be get as l1=L2×Vx-Vl2V0-Vl2=6300×114.51-71342-71=1017mm It’s justifiable to plac