Anterior lower cervical spine (C3 ~ C7) fixation device design and bio-mechanical analysis.docVIP

 PAGE \* MERGEFORMAT 19 Anterior lower cervical spine (C3 ~ C7) fixation device design and bio-mechanical analysis Author: Lee Seung-Xi Guang Qing Huang Chien-ming, ZHU Qing-An Wang Wenjun Li Kam-yi [Abstract] Objective To have a strong bio-mechanical strength, low price, suitable for people under the anterior cervical fixation device. Methods According to the foreign cervical spine locking plate (cervical spine locking plate, CSLP) features, and to improve the design of a fixator. With 16 of fresh produce porcine cervical spine injury cervical spine instability model and randomly divided into two groups, will be designed with the traditional internal fixator AO ‘Ⅰ ‘-shaped plate to compare the biomechanical experiments. The results of the design of fixation group to C3 ~ C5 segment of flexion, extension, axial rotation and lateral bending direction of the average range of motion (ROM) than the ‘Ⅰ ‘-shaped plate fixation group were reduced by 48.6% (P amp;lt; 0  01), 48.3% (P amp;lt;0.05), 46.5% (P amp;lt;0.01), 52.1% (P amp;lt;0.01). Conclusion The design of unstable spinal fixation device to provide real-time stability is better than ‘Ⅰ ‘-shaped plate for internal fixation device to provide a scientific basis for clinical application. [Keywords:] internal fixation device under the biomechanical testing of anterior cervical Design and biomechanical analysis of anterior low cervical spine (C3 ~ C7) internal fixation [Abstract] Objective To explore an anterior low cervical spine internal fixation of high rigidity low price and being suitable for Chinese.Methods A new fixation had been designed taking the advantage of cervical spine locking plate made abroad.16 fresh cervical spine specimens destabilized with C4 reconstructed with anterior bone graft were randomly divided into 2 groups: control and test group.Control group was stabilized by common AO ‘Ⅰ ‘ type plate, whereas test group were treated with new fixation.Biomechanical test was made to c