JFE_HITEN610U2L钢制聚丙烯球罐组焊技术.pdf

第 42 卷 第 4 期 Vol．42 No．4 2012 年 4 月 Electric Welding Machine Apr．2012 JFE-HITEN610U2L 钢制聚丙烯 球罐组焊技术 王清栋，郝伟沙，王安军，王传标 (合肥通用机械研究院，安徽合肥 230088) 摘要：日本 JFE－HITEN610U2L 属－50 ℃ 低温调质高强钢，可用于 3 000 m3 丙烯球罐的制造，试验研 究表明该钢不仅具有优良的低温韧性，且可焊性良好，焊接接头的力学性能较高。通过分析球罐的焊接工 艺评定以及工程施工实践，总结该钢的焊接工艺，介绍了焊接施工的关键技术措施。实践证明，该焊接 工艺符合相关技术标准要求，能够用于指导 3 000 m3 高参数丙烯球罐的建造，可以确保其焊接质量， 为该类球罐的建造提供了借鉴。 关键词：JFE－HITEN610U2L 钢；焊接性；焊接工艺；TOFD 中图分类号：TG457．6 文献标识码：B 文章编号：1001－2303(2012)04－0028－06 Assembly welding technology of JFE－HITEN610U2L quenched and tempered high strength steel polypropylene spherical tank WANG Qing－dong，HAO Wei－sha，WANG An－jun，WANG Chuan－biao (Hefei General Machinery Research Insititute，Hefei 230088，China) Abstract：－50 ℃ JFE－HITEN610U2L quenched and tempered high strength steel which made in Japan can be used for the 3 000 m3 propylene spherical tanks．Experimental studies show that the steel has excellent low temperature toughness，good weldability and the mechanical properties of the welded joint is higher，too．With the study of the spherical tank welding technology assessment and construction practices，summarizes the welding process and introduces the key technical measures．Practice has proved，the welding process in accordance with the relevant requirements of technical standards，can be used to guide welding of the high number of propylene spherical tank and the quality of the tank are assured,While the article has so