MRTS05未结合路面讲述.docx

Main Roads Technical Standard MRTS05 Unbound Pavements 未结合路面 October 10  TRADEMARKS ACKNOWLEDGEMENT Terms mentioned in this document that are known or understood to be trademarks, whether registered or not, have been identified. Where trademarks have been confirmed as registered in Australia, this has been indicated by the addition of the ? symbol, otherwise the ? symbol is used. While all care has been taken to identify trademarks, users should rely on their own inquiries to determine trademark ownership. Use of a term in this document as a trademark should not be regarded as affecting the validity of any trademark. IMPORTANT INFORMATION The requirements of this document represent Technical Policy of the department and contain Technical Standards. Compliance with the department’s Technical Standards is mandatory for all applications for the design, construction, maintenance and operation of road transport infrastructure in Queensland by or on behalf of the State of Queensland. This document will be reviewed from time to time as the need arises and in response to improvement suggestions by users. Please send your comments and suggestions to the feedback email given below. FEEDBACK Your feedback is welcomed. Please send to  HYPERLINK mailto:mr.techdocs@.au mr.techdocs@.au. DISCLAIMER This publication has been created for use in the design, construction, maintenance and operation of road transport infrastructure in Queensland by or on behalf of the State of Queensland. Where the publication is used in other than the department’s infrastructure projects, the State of Queensland and the department gives no warranties as to the completeness, accuracy or adequacy of the publication or any parts of it and accepts no responsibility or liability upon any basis whatever for anything contained in or omitted from the publication or for the consequences of the use or misuse of the publication or any parts of it. If the publication or any part of it forms part of a written