凸轮激波滚动活齿传动啮合力分析方法.pdfVIP

维普资讯 学兔兔 第44卷第5期 机 械 工 程 学 报 vo1．44 No．5 2008年 5月 CHINESE JOURNAL OF MECHANICAL ENGINEERING May 2008 凸轮激波滚动活齿传动啮合力分析方法木 李剑锋 董新蕊 (北京工业大学北京市先进制造技术重点实验室 北京 100022) 摘要：介绍凸轮激波滚动活齿传动的传动原理及结构特点，推导中心内齿轮的理论和工作齿形方程。基于弹性小变形及变形 协调假设给出理论状态下啮合力分析的模型和算法，结合啮合力计算示例对提出的方法进行说明，并初步获得此类传动装置 的啮合力分布特点。得到的啮合力分析结果可作为凸轮激波滚动活齿传动的结构设计、效率与刚度估计以及强度校核的分析 基础。 关键词：滚动活齿传动 凸轮激波 啮合副 力分析 中图分类号：TH132．41 Method of Meshing Force Analysis for the Movable Rolling Teeth Transmission with Cam Actuating LI Jianfeng DONG Xinrui (Key Laboratory of Beijing Municipality for Advanced Manufacturing Technology, Beijing Unive~ity of Technology,Beijing 1 00022) Abstract：The drive principle and structural characteristics of the movable rolling tooth transmission with cam actuating are intro· duced．the theoretical and working teeth profile equations ofcentral inner gear are deduced．Based on the hypothesis ofstretch small distortion and distortion congruity,the model and algorithm of meshing force analysis under theoretical conditions are proposed，the pmsemed method is illustrated through an example of meshing force calculation，and the distributing characteristic of meshing forces of this type of transmission device is preliminarily acquired．The acquired result of meshing force analysis can be adopted as the analytical base for structure design，efficiency and stiffness estimation，as well as intension checkout of the movable rolling tooth transmi ssion wjth cam actuating． Key words：Movable rolling teeth tra