IntroductiontoMetallography-PACETechnologies.pdfVIP

INTRODUCTION TO METALLOGRAPHY Introduction to Metallography Metallography has been described as both a science and an art. Traditionally, metallography has been the study of the microscopic structure of metals and alloys using optical metallographs, electron microscopes or other surface analysis equipment. More recently, as materials have evolved, metallography has expanded to incorporate materials ranging from electronics to sporting good composites. By analyzing a material’s microstructure, its performance and reliability can be better understood. Thus metallography is used in materials development, incoming inspection, production and manufacturing control, and for failure analysis; in other words, product reliability. Metallography or microstructural analysis includes, but is not limited to, the following types of analysis: • Grain size • Porosity and voids • Phase analysis • Dendritic growth • Cracks and other defects • Corrosion analysis • Intergranular attack (IGA) • Coating thickness and integrity • Inclusion size, shape and distribution • Weld and heat-affected zones (HAZ) • Solder joints • Distribution and orientation of composite fillers • Graphite nodularity • Recast • Carburizing thickness • Decarburization • Nitriding thickness • Intergranular fracturing • HAZ Sensitization • Flow-line Stress 1 INTRODUCTION TO METALLOGRAPHY Grain Size For metals and ceramics, grain size is perhaps the most significant metallographic measuremen