SL-DGQADefence.docVIP

HAL:AIRCRAFT DIVISION, NASIK INFORMATION ON INSPECTION AND TESTING FACILITIES AVAILABLE AT HAL AIRCRAFT DIVISION NASIK 1.METROLOGY EQUIPMENTS SL NO TEST FACILITIES/ PARAMETERS NAME OF EQUIPMENT MAKE RANGE/ACCURACY REMARKS (YEAR OF PURCHASE/ INSTALLATION) 1. LINEAR MEASUREMENT ANGULAR MEASUREMENT THREAD PROFILES RADIUS MEASUREMENTS UNIVERSAL MICROSCOPE USSR RANGE 0-200 mm LINEAR 0-100 mm TRANSVERSE 0-360 (ANGULAR ACCURACY 0.001mm AND 1 min 1965 2. LINEAR MEASUREMENT ANGULAR MEASUREMENT PROFILES AND RADIUS MEASUREMENTS PROFILE PROJECTOR NIKON JAPAN RANGE 0-200 mm LINEAR 0-150 mm TRANSVERSE 0-360 (ANGULAR ACCURACY 0.001mm AND 1 min 2002 3. LINEAR MEASUREMENT ANGULAR MEASUREMENT THREAD PROFILES RADIUS AND EFFECTIVE DIAMETER MEASUREMENTS. UNIVERSAL MEASURING MACHINE SIP SWISS RANGE 0-400 mm LINEAR 0-100 mm TRANSVERSE 0-360 (ANGULAR ACCURACY 0.0005mm AND 1 min 1975 4. LENGTH DIAMETER MEASUREMENTS SIGMA COMPARATOR UK RANGE = 150mm ACCURACY O.1,0.20.5 MICRONS 1975 5. SURFACE FINISH SURTRONIC 3+ TAYLOR HOBSON UK RANGE= 300 MICRONS ACCURACY= 0.01 MICRONS 1998 6. EFFECTIVE DIAMETER OF THREAD PLUG GAUGES AND TAPS FLOATING CARRIAGE DIAMETER MEASURING MACHINE ACCURATE PUNE RANGE: 0-100mm ACCURACY: 0.2 MICRON 1990 7 LINEAR MEASUREMENTS IN CARTESIAN AND POLAR COORDINATES THREE COORDINATE MEASURING MACHINE VALIDATOR BROWN SHARPE USA RANGE;X=914mm: Y=1828mm Z=600 mm RESOLUTION=0.001mm 1980 SLNO TEST FACILITIES/ PARAMETERS NAME OF EQUIPMENT MAKE RANGE/ACCURACY YEAR OF PURCHASE/ INSTALLATION 8. HEIGHT AND 2D MEASUREMENTS LINEAR HEIGHT MITUTOYO JAPAN RANGE=0-600mm LC= 0.001mm 1998 9. 10. SQUARENESS OF ENGINEER’S SQUARE EFFECTIVE DIAMETERS OF THREAD RING GAUGES SQUARE TESTER MATRIX INTERNAL DIAMETER MEASURING MACHINE FMS GERMANY MATRIX UK RANGE: BLADE LENGTHS 40-400 mm ACCURACY=1 MICRON RANGE 6-150mm ACCURACY= 0.2MICRON 1980 1970 11. MEASUREMENT OF S