新一代企业无线网络安全与管理综合解决方案.pptVIP

* * * * * * Aruba provides tools for RF planning and management. Because all of the APs are managed by the switch to control their channel and power level site surveys are a thing of the past. The Aruba switch can perform automatic 3D calibration to give you the best channel plan to avoid interference and provide optimum coverage and throughput in your entire building(s). * * * * Aruba provides tools for RF planning and management. Because all of the APs are managed by the switch to control their channel and power level site surveys are a thing of the past. The Aruba switch can perform automatic 3D calibration to give you the best channel plan to avoid interference and provide optimum coverage and throughput in your entire building(s). * * * * Because the switch has a centralized view of the RF environment other features are possible. * Aruba’s solution provides the capability to automatically adjust the power output of surrounding APs when another AP becomes inoperable (e.g. unplugged, defective, etc.). * The switch detects the failure of an AP and tells the other APs what settings to use to provide coverage in the area formerly handled by the now dead AP. Note, because of the 3D calibration from Aruba the coverage may come from APs on the floor above or below or from surrounding APs. [During calibration it is also possible that the switch will tell some APs to become “APMs” - access point and air monitor dual mode. This is done when the switch determines that adequate coverage is possible without using all of the APs. This way additional intrusion detection and prevention can be provided by the APM running in AM mode and if an outage occurs the APM can switch to AP mode to provide data access.] * The Aruba switch can also provide load balancing across multiple APs to ensure that all users can obtain optimal throughput. When many users come to a conference room for a meeting their laptops will normally try to associate with the AP with the strongest signa