稳态和暂态电流测量合一的电子式电流互感器量程切换设计 .pdfVIP

学兔兔 总第47卷 第536期 电测与仪表 VO1．47 No．536 2010年 第O8期 Electrical Measurement Instrumentation Aug．2010 稳态和暂态电流测量合一的电子式电流互感器量程切 换设计术 张雷，朱永利，张敬敬，邓雷 (华北电力大学 电力工程系，河北 保定 071003) 摘要：为满足电子式电流互感器对高压电网各阶段电流都具有较高测量精度的要求，本文提出了一种新型的量 程切换电路。对于采用罗氏线圈的电流互感器，通过对罗氏线圈的感应电压进行幅值和绝对值双重监测达到跟 踪电压峰值变化的目的，在稳态采用幅值监测加绝对值辅助监测的方式，在暂态采用绝对值监测并反馈锁定的 方式。利用得到的监测信号控制仪表放大器INA110的电路连接对罗氏线圈各阶段的感应电压进行不同放大，从 而实现量程的高速自动切换。实验表明这种设计能使电流互感器快速自动切换量程以充分利用其内部电子资 源。本文对电子式电流互感器的设计有一定的参考价值。 关键词：电子式电流互感器；量程切换；罗氏线圈；双重监测；自适应放大；INA110 中图分类号：TM452 文献标识码：B 文章编号：1001—1390(2010)08—0057—04 A Design of Switch Range for ECT Measuring both of Steady Current and Transient Current ZHANG Lei，ZHU Yong-li，ZHANG Jing-jing，DENG Lei (Department of Electrical Engineering，North China Electric Power University，Baoding 071003，Hebei，China) Abstract：In order to meet the requirements of high accuracy for ECT measuring high voltage power network current in every stage，a new design of switch range circuit is proposed in the paper．ECT with Rogowski coil tracks the changes of the induced voltage amplitude by means of monitoring the value of amplitude and the absolute value of the induced voltage from the Rogowski coil．The transformer monitors the amplitude value and absolute value as supplement in steady conditions，and locks~edback of the monitoring of the absolute value in transient conditions． The monitor signal is used to control the circuit collection of INA1 10，to amplify different stages of the induced vohage with different magnification times，SO as to achieve automatic high-speed switch range in ECT．It has been proved that the design is feasible for ECT switc