过程自动化常规检测仪表故障分析探索.pdfVIP

学兔兔 过程自动化常规检测仪表故障分析探索 占 勇 过程自动化常规检测仪表故障分析探索 古 勇 (重庆市机电设计研究院 重庆，401147) 摘 要：过程自动化常规检测仪表包括温度、流量、压力、液位检测，由于生产工艺的多样性和复杂性，导致故障现象 复杂多变。正确分析、实时处理生产过程中仪表故障，不但直接关系到生产的安全与稳定，同时也是保障产品质量和生产 消耗的基础，同时也能反映仪表维护人员的实际工作能力和业务水平，从而保障仪表维护人员获得工艺操作人员信任，彼 此形成默契配合的关键。本文分析了常见仪表故障的判断思路，探讨了四大常规过程检测仪表常见的故障模式及分析步 骤，供仪表维修与使用人员参考。 关键词：过程监测；仪表；故障模式；故障分析 Abstract：The process automation convention examination measuring appliance including the temperature，the current ca— pacity,the pressure，the fluid position examination，as a result of the production craft multiplicity and the complexity,causes the breakdown phenomenon complex changeable．Correct analysis，in real—time processing production process measuring appliance breakdown，not only relates the production directly the security and stable，simultaneously also is safeguards the product quality and the productive consumption foundation，simultaneously also can reflect the measuring appliance attendant’S practical work ability and the vocational level，thus the safeguard measuring appliance attendant obtains the craft operator to trust，each other forms the tacit understanding coordination the key．This article has analyzed the coml~on measuring appliance breakdown judg— ment mentality,has discussed four big conventional process examination measuring appliance common breakdown pattem and the analysis step，services for the measuring appliance and uses the personnel to refer． Key words：Process Examination；Instrument；Fault Mode；Fault Analysis 中图分类号：TP393 文献标识码：B 文章编号：1001—9227(2013)一01-0170-02 1 过程仪表常见故障的判断思路 和控制阀的特性变化。被测控制对象和控制阀的特性变化是现