BA3529AFP.pdfVIP

Audio ICs Pre / power amplifier and motor governor for 3V headphone stereos BA3528AFP / BA3529AFP The BA3528AFP and AB3529AFP have been developed for headphone stereos. They run off a 3V power supply, and include dual pre- and power amplifiers, and a motor governor. The preamplifiers are direct-coupled, and the power amplifiers use a fixed-gain NF circuit. An on-chip VREF amplifier makes output coupling capacitors unnecessary, and the motor governor uses a bridge ratio system to minimize the exter- nal parts count and make reliable and compact designs possible. Applications 3V portable stereo equipment Features 1) All the functions required for headphone stereo units 4) No output coupling capacitors required for the power on a single chip. amplifiers. 2) Preamplifier includes a mute amplifier. 5) Power amplifiers do not require oscillation prevention 3) Direct-coupled preamplifier. measures. 6) Power amplifier gain allows use of noise reduction (BA3529AFP). Absolute maximum ratings (Ta = 25 C) Recommended operating conditions (Ta = 25C) 385 Audio ICs BA3528AFP / BA3529AFP Block diagram 386 Audio ICs BA3528AFP / BA3529AFP Electrical characteristics (unless otherwise noted, Ta = 25C, VCC = 3V, and f = 1kHz) BA3528AFP 387 Audio ICs BA3528AFP / BA3529AFP BA3529AFP 388 Audio ICs BA3528AFP / BA3