企业操作流程抄报税和申报.doc

企业操作详细流程(抄报税和申报) 本软件的功能是从企业税控IC卡中读取报税数据，在进行加密后向税局服务器端上传，并能查询企业的报税结果信息，报税成功后进行清卡操作，使得企业可继续开具发票。 把注册文件放在开票系统电脑C:\Program Files\航天信息\防伪开票\BIN下面,重进开票系统(操作员选择航税管理员,密码hangshui),点击系统设置-参数设置-远程抄报,把IP地址和端口号输上去后正常使用 远程抄报地址 218.70.65.76 端口7001 第一步 执行远程抄报税（在远程抄报税系统中操作） 增值税防伪税控开票系统在实现网上抄报功能后可以从企业税控IC卡中读取报税数据，在进行加密后往税局服务器端上传，并能查询企业的报税结果信息，报税成功后有远程清卡权限的纳税人可进行清卡操作，使得企业可继续开具发票。 操作流程为：报税状态(远程报税(报税结果(清卡操作 1、读取金税卡报税状态 操作步骤操作步骤 重庆市国家税务局网上申报办税操作指南 or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test and performance test copies of the record. If necessary