基于SOPC技术的电压闪变仪研究.pdfVIP

学兔兔 第51卷 第2期 电测与仪表 VoI．5l NO．2 2014年 1月25日 EIectrical Measurement Instrumentation Jan．25．2014 基于SOPC技术的电压闪变仪研究 吴炜 ，陈劲操 (1．余姚市供电局，浙江余姚 315400；2．南京理工大学动力工程学院，南京210094) 摘要：讨论分析了IEC推荐的电压闪变检测系统。通过系统设计方案论证，提出了ARM微处理器与SOPC综合设 计的方案，设计了基于双口RAM的SOPC电压闪变检测系统。完成了电压闪变检测系统的硬件设计。利用DSP Builder技术实现了MATLAB~具与硬件资源的有机结合。采用Quartus II、SOPC Builder、DSP Builder和Nios II IDE三个软件完成SOPC系统软件设计。完成了样机制作与调试，进行了电压闪变仪的测试工作，试验表明系统 运行稳定，实现了电压闪变检测。 关键词：电压闪变；检测；双口RAM；SOPC；Nios II 中图分类号：TM933 文献标识码：B 文章编号：1001—1390(2014)02—0096—05 Study on SOPC Based Flickermeter 1 2 WU Wei．CHEN Jin-cao (1．Yuyao Power Supply Bureau，Yuyao 315400，Zhejiang，China． 2．School of Power Engineering，Nanjing University of Science and Technology，Nanjing 210094，China) Abstract：The flicker detection system recommended by IEC is discussed and analyzed in the paper．Based on systematic design and verification，the design scheme that integrates ARM microprocessor with SOPC design is proposed．The SOPC based voltage flicker detection system with dual—port RAM is designed，and the hardware design of the system has been finished．DSP Builder is used to integrate MATLAB tool with hardware resources． Quartus II，SOPC Builder，DSP Builder and Nios II IDE software are used to design the software of SOPC system． Implementation and debugging of the prototype system has been done．The test for the voltage flickermeter shows that the system is stable and realizes the detection of the voltage flicker． Key words：voltage flicker，detection，dual—port RAM，SOPC，Nios I1 0 引 言