ls3217可靠度流程图0612.pptVIP

Confidential Information from LITE-ON SEMICONDUCTOR CORP. Confidential Information from LITE-ON SEMICONDUCTOR CORP. AL3217可靠度流程圖 2012/6/12 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 0. 需先將母板放入可靠度機台入 1. 母板VDD、VBUS 連接到電源供應器(如圖一) 電源供應器與母板的GND須互相連接 2. 母板GND與控制板GND互相連接，母板SDA、SCL與 控制板SDA、SCL互相連接(如圖二) 3. 使用程式將IC進入Operation狀態(如圖三) 4. 讀取IC是否正確進入Operation狀態(如圖四) 5. 重覆 2 ~ 4 步驟使母板上所有IC都進入Operation狀態 6. 移除母板與控制板之間的連線(SDA、SCL 、 GND) 僅留下與電源供應器之間的連線(VDD、VBUS 、 GND) 7. 將門關上後使可靠度機台運作 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. Power Supply ⊕ 接至 REL 母板的 VDD，VDD 與 VUSB 連接在一起 Power Supply Θ 接至 REL 母板的 GND 電源接線圖 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. VDD VUSB 接 power ⊕ 1.98V GND 接 power GND 圖一 下排所有有接VUSB的 R 焊上電阻 2.2K Ω Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 圖三 ID=38；Address=00；Data=03 按下“Write CMD” (第一個 CMD)即可使IC進入Operation狀態 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. ID=39；Address=00；Data=00 按下“Read CMD” (第二個 CMD) 讀取IC內部是否進入Operation狀態 若 Data 為 3，則為正確 圖四 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. A：PCB母板由40pcs板更换成45pcs板，其电阻及上电导柱如何焊接，请在图中标出. Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd.