钢筋切断机设计分解.docxVIP

分类号 TG68 单位代码密级公开学号XXX学校学生毕业设计（论文）题目钢筋切断机设计作者XXX院 (系)能源工程学院专业机械设计制造及其自动化指导教师XX答辩日期年 5 月 27 日毕业设计（论文）诚信责任书本人郑重声明：所呈交的毕业设计（论文），是本人在导师的指导下独立进行研究所取得的成果。毕业设计（论文）中凡引用他人已经发表或未发表的成果、数据、观点等，均已明确注明出处。尽我所知，除文中已经注明引用的内容外，本论文不包含任何其他个人或集体已经公开发表或撰写过的研究成果。对本文的研究做出重要贡献的个人和集体，均已在文中以明确方式标明。本人毕业设计（论文）与资料若有不实，愿意承担一切相关的法律责任。 论文作者签名: 年 月 日摘 要本次设计的卧式钢筋切断机，其工作原理为：采用电动机经一级三角带传动和二级齿轮传动减速后,带动曲轴旋转,曲轴推动连杆使滑块和动刀片在机座的滑道中作往复直线运动,使活动刀片和固定刀片相错而切断钢筋。依据电机工作环境选择电机类型，采用卧式安装，防护式电机，鼠笼式三相异步电动机。传动方案的简述：选择三级减速，首先是一级带减速，其次两级齿轮减速。期初选用一级带传动，由于它具备缓冲、吸振、运转平稳、噪声小、和过载保护等益处。继而选用两级齿轮减速，由于齿轮传动可以用来传递空间任意两轴之间的运动及动力，并且具备功率范围较大，传动效率较高，传动比精确，使用的寿命长，工作安全性可靠等优点。动能由电动机输出,经过减速系统的传动,把动能输入到执行机构。因为传动系统做的是回转运动,可是钢筋切断机的执行机构做的是直线往复运动,为了实现这种改变,本设计选用曲柄滑块机构作为执行机构。关键词：切断，钢筋，齿轮AbstractThe design of the horizontal steel cutting machine, its working principle is : the use of V-belt drive motor after primary and secondary gear reducer , drive crankshaft rotation , the crankshaft push rod and move the slider in the base of the blade slide Road for reciprocating linear motion , so that the activities with the wrong blade and a fixed blade and cut rebar.Select the motor according to the type of motor work environment , the use of horizontal installation , protection motor, three-phase squirrel cage induction motor . Brief transmission scheme: Choose three deceleration , the first level with a deceleration , followed by a two-stage gear . Beginning -level belt drive selection , etc. because it has a buffer , absorbing vibration , smooth operation , low noise, and overload protection benefits. Then choose two-stage gear , because gear can be used to pass any motion of space and power between two shafts , and have a larger power range , high transmission efficiency, precise gear ratio , long life to use, reliable and job security and so on. Kinetic energy output by the motor through reduction gear system , the kinetic energy input to the actuator . Because the transmission is done rotary motion , but implementing age