气焊作业安全技术交底范例.docVIP

气焊作业安全技术交底范例 气焊作业安全技术交底范例提要：乙炔气瓶必须装减压阀和防回火装置，乙炔气瓶与氧气瓶之间距离不得小于5m，严禁平放，严禁曝晒，距易燃易爆物品和明火的距离不得少于10m 气焊作业安全技术交底范例 1、气焊工须持特种作业证上岗，作业证过期末年审的不准施焊作业。 2、施焊作业必须办理动火审批手续。 3、施焊场地周围应清除易燃易爆物品，或进行覆盖、隔离，并在施焊部位配备灭火器材。 4、必须在易燃易爆气体或液体扩散区施焊时，应经有关部门检试许可后，方可施焊。 5、乙炔气瓶必须装减压阀和防回火装置，乙炔气瓶与氧气瓶之间距离不得小于5m，严禁平放，严禁曝晒，距易燃易爆物品和明火的距离不得少于10m。检验是否漏气，要用肥皂水，严禁用明火e 6、氯气瓶、氧气表及焊割工具上，严禁沾染油脂。 7、气瓶的购、运、储存和领用必须严格执行公安部门的有关规定。 8、点火时，焊枪口不准对人，正在燃烧的焊枪不得放在工件或地面上。带有乙炔和氧气时，不堆放在金属容器内，以防气体逸出发生燃烧事故。 9、严禁在带压力的容器或管道上施焊，焊接带电的设备必须先切断电源。 10、焊接贮存过易燃、易爆、有毒物品的容器或管道，必须清除干净，并将所有气孔打开。 11、作业结束，应将气瓶气阀关好，拧上安全罩，检查作业地点，确认无着火危险，方可离开。 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. The formation of excellent moral education curriculum system and management system, the construction of school. The soci