雾化室内气压对Sn0.3Ag0.7Cu焊锡粉末雾化过程的影响.pdfVIP

学兔兔 Vo1．25，No．5，p17—21 第 25卷 第5期 粉末-台金工业 2015年10月 POWDER METALLURGY INDUSTRY Oct．2015 DOI：10．132288．boyuan．issnl006—6543 雾化室内气压对Sn AgCu焊锡粉末雾化过程的影响 王子逾，赵麦群，韩 帅，吴道子，赵 振 (西安理工大学材料科学与工程学院，陕西 西安 710048) 摘 要：利用超音速气雾化装置制备了Sno，Ag。 Cu无铅焊锡粉末，研究了雾化室内不同气压状态对粉末雾化 过程的影响。结果表明：随着雾化室内部气压的逐渐增大，锥形雾化区由稳定逐渐趋于紊乱，锥形雾化区范围 逐渐变大，气液流量比也随之增大，粉末球形度先变好后变差。当雾化室内部气压为0．05 MPa时，锥形雾化 区稳定且雾化区范围大，粉末球形度最好。 关键词：超音速气雾化；Sn Ag。 Cu；锥形雾化区；球形度 文献标志码：A 文章编号：1006．6543-(2015)05-0017—05 Effect of atomizing chamber pressure on the atomization process of SnojAgo．7Cu solder powder WANG Zi—yu，ZHAO Mai—qun，HAN Shuai，WU Dao—zi，ZHAO Zhen rSchool of Materials Science and Engineering，Xi’an University of Technology,Xi’an 7 1 0048，China) Abstract：The Sn0 3Ag0,Cu lead—free solder powder was prepared with supersonic gas atomization device to study the effects of different pressure states inside the atomization chamber on the atomization process of powder．The re— suits show that conical atomization area tends to disorder from stable state with the atomizing chamber pressure in— creasing，moreover,the conical atomization area becomes larger gradually,gas—liquid flow ratio also increases，and the sphericity degree of atomized powder becomes better firstly and then worse．When the pressure inside the chamber is 0．05 MPa，the conical atomization area is stable and has large area，the sphericity degree of atomized powder is the best． Key words：supersonic gas atomization；Sno 3Ag0 7Cu