汽车结构有限元分析第四讲有限元程序应用介绍.pptVIP

第四讲 有限元程序应用介绍 ------ANSYS程序介绍与上机操作 合肥工业大学机械与汽车学院 2010年2月 1.有限元软件前处理 前处理建模菜单 ：Preprocessor Element Type Add/Edit/Delete Structural (Mass, Link, Beam, Pipe, Solid, Shell) Constraint (MPC) Contact Combination (Spring-damper, Combination, Revolute) Superelement Real Constants Material Properties Material Library Material Models: Structural: Linear: Elastic Nonlinear: Elastic, Inelastic, Rate Independent, Rate Dependent Density Damping Friction Coefficient Sections Section Library, Beam, Shell, Joints 前处理建模菜单 ：Preprocessor--- Modeling Create: Keypoints Lines (Lines, Arcs, Splines, Line Fillet) Areas (Arbitrary, Rectangle, Circle,Polygon, Area Fillet) Volumes (Arbitrary, Block, Cylinder, Prism, Sphere, Cone) Nodes (Write /Read Node File) Elements (Write /Read Node File, Superelements) Operate: Extrude (Keypoints, Lines, Areas) Booleans (Intersect, Add, Subtract, Divide, Glue, Overlap) Scale (Keypoints, Lines, Areas, Volumes, Nodes) Calc Geom Items (Keypoints, Lines, Areas, Volumes) Move/Modify: Keypoints, Lines, Areas, Volumes, Nodes, Elements Rotate Node CS Transfer Coordinate Reverse Normals Copy：Keypoints, Lines(Mesh), Areas(Mesh), Volumes, Nodes, Elements Reflect：Keypoints, Lines, Areas, Volumes, Nodes, Elements Check Geom:Select Small Lines, Show Degeneracy, KP distance , ND distance Delete:Keypoints, Lines, Areas, Volumes, Nodes, Elements 前处理建模菜单 ：Preprocessor--- Meshing Mesh Attributes: Element type number Material number Real constant set number Element coordinate system Mesh Tool: Element Attributes Set Smart Size (Fine, Coarse) Size Controls (Keypoints, Lines, Areas, Global) Mesh (Keypoints, Lines, Areas, Volumes) Shape (Tet, Hex,Tri, Quad, Free, Mapped, Sweep) Size Controls: